Signamax #065-1196SFPDR 10/100/1000 to 1000Base/100Base SFP Media Converter

Description

Signamax #065-1196SFPDR 10/100/1000 to 1000Base/100Base SFP Media Converter

The Signamax 10/100/1000 to 100/1000 SFP Media Converters provides a flexible and intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and either 1000Base Gigabit Ethernet fiber or 100Base fiber networks. The built-in 10/100/1000 switch enables the fiber cable connection to operate at 1000 Mbps, while remaining completely 1000BaseSX/LX or 100BaseFX/BX standard-compliant for the fiber optic connection.

The dual-rate fiber converter includes the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes where required.  The Link Fault Signaling provides a means of propagating a link drop on either port of the media converter to the other port, enabling a connected managed switch to see the link drop and respond to it using Spanning Tree Protocol or another recovery scheme.

• Dual-Rate 1000Base or 100Base SFP capability
• Extremely low latency supports larger multi-hop networks
• Extremely high reliability; MTBF of over 212 years
• Gigabit transmission supports 9K bytes jumbo frames
• IEEE 802.3x flow control for full duplex and back pressure for half duplex supported
• DIP switch configuration for link fault signalling, fiber auto/force mode, and SFP speed
• Full wire-speed forwarding rate
• Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis

• APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX
IEEE 802.3z 1000BaseLX
IEEE 802.3x Flow Control

• PORTS

1 – RJ-45 10/100/10000BaseT/TX port plus
1 -Dual-rate 1000Base or 100Base SFP port

• LED STATUS INDICATORS

Per Unit: Power; LFS Status; Full Duplex
Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
Per SFP Port: Link Fiber

• PERFORMANCE

Latency: ≤1.6 μs (FIFO).
MTBF: 1,857,775.35 hours (212.07 years), calculated via the Part Stress Analysis Method.
Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets)
Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
Frame Buffer: 12K total
Jumbo Frame Support: 9K packets supported

• DIP SWITCH SETTINGS

No. Down Up Notes 1 Disable LFS Enable LFS LFS: Link Fault Signaling function 2 Enable Auto-Negotiation for TX port Enable Force mode for TX port 3 TX port Force mode: Full-duplex TX port Force mode: Half-duplex 4 TX port Force mode: 100 Mbps TX port Force mode: 10 Mbps 5 SFP at 100 Mbps SFP at 1000 Mbps 6 Function reserved Function reserved

 

• ELECTRICAL CHARACTERISTICS

12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.

• ENVIRONMENTAL REQUIREMENTS

Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -14°F to 158°F (-10°C to 70°C)
Relative Humidity: 5% to 95% (non-condensing)

• PHYSICAL CHARACTERISTICS

Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)

• CERTIFICATIONS

CE, FCC, ROHS, VCCI Class A

• WARRANTY