Signamax 065-1196a 1000BaseSX SC/MM 220/550m 110V Media Converter

Description

Signamax 065-1196a 1000BaseSX SC/MM 220/550m 110V Media Converter

10/100/1000BaseT/TX to 1000BaseSX Media Converter, SC/MM 220 m Span on 62.5 μm Fiber / 550 m Span on 50 μm Fiber

 

• Extremely low latency supports larger multi-hop networks
• Extremely high reliability; MTBF of over 112 years
• Gigabit transmission supports 9K bytes jumbo frames
• IEEE 802.3x flow control for full duplex and back pressure for half duplex supported
• DIP switch configuration for link fault signalling, fiber auto/force mode, and SFP speed
• Full wire-speed forwarding rate
• Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis

 

• APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX
IEEE 802.3z 1000BaseLX
IEEE 802.3x Flow Control

• PORTS

1 – RJ-45 10/100/10000BaseT/TX port.
1 -1000BaseSX or 1000BaseLX fiber optic port.

• LED STATUS INDICATORS

Per Unit: Power; LFS Status; Full Duplex
Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
Per Fiber Port: Link Fiber

• PERFORMANCE

Latency: ≤1.5 μs (FIFO).
MTBF: 985,339.89 hours (112.48 years), calculated via the Part Stress Analysis Method.
Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets)
Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
Frame Buffer: 12K total
Jumbo Frame Support: 9K packets supported

• DIP SWITCH SETTINGS

No.	Down	Up	Notes
1	Disable LFS	Enable LFS	LFS: Link Fault Signaling function
2	Enable Auto-Negotiation for TX port	Enable Force mode for TX port
3	TX port Force mode: Full-duplex	TX port Force mode: Half-duplex
4	TX port Force mode: 100 Mbps	TX port Force mode: 10 Mbps
5	Function reserved	Function reserved
6	Function reserved	Function reserved

 

• FIBER INTERFACE

Type:
P/Ns 065-1196A/1196AED: Laser Diode
P/Ns 065-1196ALX/1196ALXED: MQW Laser
Wavelength:
P/N 065-1196A: 850 nm nominal (830 nm max.,860 nm min.)
P/N 065-1196AED: 1310 nm nominal (1270 nm max.,1355 nm min.)
P/N 065-1196ALX: 1300 nm nominal (1270 nm max.,1355 nm min.)
P/N 065-1196ALXED: 1300 nm nominal (1261 nm max.,1360 nm min.)
Max Output Power:
P/N 065-1196A: -4.0 dBm
P/N 065-1196AED: 0.0 dBm
P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
Min Output Power:
P/N 065-1196A: -9.5 dBm
P/N 065-1196AED: -6.0 dBm
P/N 065-1196ALX: -11.0 dBm
P/N 065-1196ALXED: -8.0 dBm
Sensitivity:
P/N 065-1196A: -13.5 dBm
P/N 065-1196AED: -17.0 dBm
P/Ns 065-1196ALX/1196ALXED: -22.0 dBm
Max Input Power:
P/N 065-1196A: -13.5 dBm
P/N 065-1196AED: 0.0 dBm
P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
Link Power Budget:
P/N 065-1196A: 4.0 dB
P/N 065-1196AED/ 1196ALX: 11.0 dB
P/N 065-1196ALXED: 14.0 dB

• ELECTRICAL CHARACTERISTICS

12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.

• ENVIRONMENTAL REQUIREMENTS

Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -14°F to 158°F (-10°C to 70°C)
Relative Humidity: 5% to 95% (non-condensing)

• PHYSICAL CHARACTERISTICS

Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)

• CERTIFICATIONS

CE, FCC, ROHS, VCCI Class A

• WARRANTY

Limited Lifetime